Out of the trailer hitch options that we offer that are confirmed for your 2022 Hyundai Santa Fe I recommend The etrailer Trailer Hitch Receiver # e28AR.
The etrailer hitch has a hidden design with only the 2 inch receiver head being visible. I also like the etrailer hitch over the others that we offer because it has a matte black finish that will help keep scratches and scuffs hidden that you may get from rocks or flying road debris when towing.
You may also need The Curt Towing Starter... view full answer...
I'd be happy to help you with that. Along with the Draw-Tite # 41543 hitch you'd looked at, you'll need the # 118473 trailer wiring harness. The harness is a plug and play installation, and would plug inline at the connection point where the vehicle's taillight wiring harnesses plug into the taillight assemblies as shown in the video I've linked for you.
You'll also need a ball mount like # C45010 with a pin and clip # PC3, as well as # 19260 for a 1-7/8 or # 63845 for a 2 inch trailer ball. view full answer...
For your 2013 Hyundai Santa Fe Sport with flush side rails, to add WingBars you will need the following items:
Thule AeroBlade load bars, # TH711200 in silver or # TH711220 in black
Thule Podium Foot Pack, # TH460R
Fit Kit, # THKIT4029
Or you can go with the more flush system using:
Thule AeroBlade Edge Roof Rack, # TH7602-TH7603
Fit Kit, # THKIT4029
You will not use the Rapid Traverse feet because they do not fit the 2013 Hyundai Santa Fe Sport with flush side rails. The reason you... view full answer...
You will start by installing the trailer wiring harness # 118571 (fits Sport models) that you have referenced. I have linked the instructions for you. To add a brake controller you will need to use 4 and 7-Way installation kit # ETBC7. This will provide the 7-Way and the wiring needed to install the P2, # 90885.
I have included some links to instructions and a video that will help you with this installation. view full answer...
For your 2013 Hyundai Santa Fe Sport, you will start by installing the # C56332 trailer wiring harness that you already have. Then to add a 7-Way you will need installation kit # ETBC7 which also includes the wiring needed to install a brake controller. I have included some links explaining the ETBC7 installation.
For a brake controller I recommend the Tekonsha P2, # 90885. This is one of our most popular brake controllers of all time because it is reliable, easy to set up and easy to... view full answer...
Either part # 118415 or C56078 will work with all 2008 Hyundai Santa Fe models. They would plug inline with the wiring harness feeding the tail light assemblies on either side of the vehicle.
The Tow Ready has a slightly higher amperage rating, but other than that both wiring harnesses are very similar.
I have provided links to the install details for both harnesses, as well as an install video showing the # 118415 being installed on a 2008 Santa Fe. view full answer...
Installation of the Tekonsha Primus IQ trailer brake controller # TK90160 in your 2008 Hyundai Santa Fe will require our brake controller install kit # ETBC7 and a 4-pole harness. Use 4-pole kit # 118415 if you do not have the factory tow package; use part # 118258 if you DO have the tow package wiring. Install videos for both harnesses are linked for you.
I also included an article and install video for the ETBC7 kit to help you with that. view full answer...
We have a kit just for this. The 7-Way Upgrade Kit w/ Junction Box and RV Style Connector part # HS381-9000 gives you all of the required components to upgrade from your existing 4-way to a 7-way plug. The only exception is the correct length of 12 Gauge Duplex Wire part # 12-1-1. You will order enough to go from where you will mount the junction box back to the axle then across to the other side.
Check out the video my buddy Ellen did. As you can see this provides excellent connection... view full answer...
In order to install an electrical hookup with a brake controller kit on your 2009 Hyundai Sante Fe, you will need the following parts:
- Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56346 (if your vehicle has the factory tow package) or # C56078 (if your does not have the factory tow package).
- Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat # ETBC7
- Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles # 90885... view full answer...
I have a way for you to safely transport your dual sport bike on your vehicle. I went ahead and looked up the specs for your 2013 Hyundai Santa Fe, and it has a maximum gross towing weight capacity of 2,800 pounds. If this is the case, the maximum tongue weight capacity of your vehicle is 280 pounds.
With this tongue weight capacity, you cannot safely mount via a hitch carrier that requires tongue weight. This is because no matter what hitch you use, your sport bike exceeds that 280 tongue... view full answer...
We have the perfect Roof Rack For your 2021 Hyundai Santa Fe with moonroof!
The Rhino-Rack Vortex Aero Crossbars # RRVA126B-2
RCL Legs # RRRCL4
Custom RCP Fit Kit for 4 Rhino-Rack RC and RV Series Roof Rack Legs # RR66QJ
This kit per as customer stated that the top of the crossbar is about 4 inches above the roof glass and does not interfere with opening the moonroof, but Rhino Rack does not recommend it.
The cross bars have a slim elliptical shape that helps to create an extremely... view full answer...
While there aren't suspension enhancement options available for your 2017 Hyundai Santa Fe, if you use your vehicle for towing you could use a weight distribution system to level your setup. Firestone has suspension kits for previous years but there isn't one for 2017 models.
A weight distribution system creates a level, stable ride when you tow a trailer. It will help keep your towing setup level and make sure the weight of your trailer doesn't cause undue stress on your vehicle. One... view full answer...
The etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" item # e98841 you referenced is a confirmed fit for your 2017 Hyundai Santa Fe Sport without the towing package. It bolts directly to your Hyundai's frame with included hardware. It has a maximum gross trailer weight of 6,000 lbs and a maximum tongue weight of 900 lbs. I have linked an installation video so you can follow along with the process and see what the final product will be.
Since your Santa... view full answer...
We can help you with wiring for your 2010 Hyundai Santa Fe Sport so you can tow your camper that has a 7-way wiring set-up.
If the car has no wiring at all you will need to start with a 4-pole harness # 118415 that is a simple plug-in installation at your Santa Fe's tail lights. You'll then add the 7-way installation kit # ETBC7 which provides both the 7-way connector you need and the other parts to install a brake controller.
Campers with a 7-way type wiring set-up usually have electric... view full answer...
When installing The 5 pole flat wire # 20036, you need to find the reverse light wire by using a circuit tester like the # PTW2979. This will detect which wire behind the tail lights has power when the reverse lights are on. The wire are different for every vehicle, so there is no proper instructions for your vehicle.
I have attached a review video link below. view full answer...
For your 2020 Hyundai Santa Fe, I recommend the Rhino-Rack Vortex Aero Crossbars # RRVA126B-2, the feet # RRRCL4, and the fit kit # RR66QJ.
This roof rack will fit onto the flush mounted rails on your Hyundai Santa Fe, and can support up to 220-lbs, however the maximum capacity is ultimately determined by your vehicle.
Since you mentioned you're wanting to transport a couple of Expression 11 Kayaks, I recommend using the Thule Compass Kayak and SUP Carrier w/ Tie-Downs # TH890000 has... view full answer...
When it comes to flat towing your 2022 Hyundai on a tow dolly, most of the trailer wiring is already included with the dolly. The Demco Kar Kaddy SS Tow Dolly with Disc Brakes - Foldable - 4,800 pounds # DM9713045 has a full LED DOT lighting package which includes brake, tail, and turn signal lights So you will not need the lights working on your Santa Fe. It also has the front fender marker lights, and the license plate marker lights and has a 4-flat trailer connector.
Your RV will either... view full answer...
For a 3500 pound axle you're going to need 10 by 2-1/4 inch brakes. I recommend the Self Adjusting Electric Brake Assembly # AKEBRK-35R-SA for the right hand side and # AKEBRK-35L-SA for the left. These are self adjusting brakes so they only need to be adjusted at installation. I've attached a review video on the brakes for you to take a look at.
For a brake controller I suggest the Tekonsha Prodigy P2 # 90885 because of how easy it is to setup and to use. The controller will mount... view full answer...
We do have a wiring harness to fit your 2019 Hyundai Santa Fe. The correct part is # CU94FR.
Since you have the tow package there's a connector under the rear bumper on the driver's side. The harness plugs in here and then you need to find a good secure location to mount the converter box. It mounts with included double-sided tape you just need to make sure the location you choose allows for the 4-way connector to reach the connector on the trailer. You also want to make sure the converter... view full answer...
In order to add a 7-Way trailer connector to your 2009 Hyundai Santa Fe on which you have already installed a 4-Way (118258) you have a couple of options. First, if you just want the basic lighting functions and nothing else then you would just need an adapter like # 37185. The 4-Way end will plug into this adapter, then you will ground the white wire to the frame and tape up and stow the other wires out of the way.
If there are functions on the trailer like electric brakes and 12 volt... view full answer...
Go To Results